Wire Mesh
Our wire mesh products are generally of Stainless Steel (Grade 304, 304L, 316, 316L, 202, 201 etc). We also produce special wire mesh according to the customer specifications like copper wire mesh, bronze wire mesh, brass wire mesh, phosphor bronze wire mesh and many more.
Stainless Steel Wire Mesh and Wire Cloth of Plain/Twilled type starting from 20 mesh onwards to 500 mesh size and SPW/DTW meshes upto 2 nominal micron filtration capacity can be supplied. We keep regular stock of Wire Mesh in large quantity. They are available in rolls or in cut circles and also as fabricated filters. As a result, we have carved a niche for ourselves as one of the most prominent Wire Mesh Manufacturer and Exporter.
Square Mesh / Fine Mesh
The most commonly used weave with square Openings. Each weft wire passes alternately over and under each warp wire and vice versa. Warp and weft wire diameters are generally the same. It produces screens with the same mesh count in both directions.
Plain weave meshes are available with apertures from 10.7mm (2 mesh) to 0.05mm (325 mesh). Suitable for many commercial applications
Twill Weave (TW)
Twill weave can be made from larger diameter wires than would be possible in plain square weave to obtain greater strength, density, or corrosion resistance. This weave is stronger than plain weave. Each weft wire alternately crosses over two, then under two, warp wires producing a diagonal pattern. The wire diameter for both warp and weft is normally the same.
Twill weave is usually used to accommodate a heavier than standard wire diameter in association with a given mesh.
Plain Dutch Weave Wire Mesh (PDW)
Woven in an over and under pattern, but warp wires are heavier — larger in diameter — than shute wires which are driven very close to create a high density wire mesh with much lower flow rates and much higher particle retention than plain square weaves .
Twill Dutch Weave Wire Mesh (TDW)
Similar to Plain Dutch except woven in the Twill Style. Each wire passes over two wires then under two wires, still utilizing a smaller-diameter shute wire, allowing an even tighter weave and even finer filtration than Plain Dutch Weave.
Reverse Twill Dutch Weave (RTDW)
Reverse Dutch Weave is produced by the use of coarse mesh (mesh wire, woven wire mesh) in the warp and a fine mesh with relatively smaller wire in the fill. This weave results in greater strength with very fine openings and is primarily used as a filter cloth. The shape and position of the openings aid particle retention and increase filter cake formation.
Hollander Weave
A plain weave with the warp wires of a larger diameter than the weft. The weave is made up of a limited number of warp wires interwoven with the maximum number of weft wires which can be knocked up. The cloth is strong and firm and is most frequently used for high pressure filtration.